Your browser does not support JavaScript!





職稱 教授
tel (07)-5919240
fax (07)-5919430


  • 統計製程管制
  • 系統模擬
  • 等候理論應用
  • 隨機過程
  • 生產與作業管理
  • Jung-Tai CHEN*(2018, Aug), A Control Chart Based on Moving Average and Moving Ratio for Monitoring Weibull Data, 品質學報, 25 (4), 211-240.(EI)
  • Jung-Tai CHEN*(2015, Dec), 應用移動和管制圖於監控高產出製程之研究, 品質學報, 22 (6), 507-535.(EI)
  • Chen, Jung-Tai, 2014, A Study on Using the Moving Average Chart for Monitoring Time-between-events, Journal of Quality,  21 (6), 479-500, DOI: 10.6220/joq.2014. (EI)
  • Chen, Jung-Tai, 2014, A Shewhart-type Control Scheme to Monitor Weibull Data without Subgrouping, Quality and Reliability Engineering International, DOI: 10.1002/qre.1542 Published online in Wiley Online Library. (SCI) (國科會專題研究計畫 NSC 100-2410-H-390 -023)
  • Chen, Jung-Tai, 2013, Design of Cumulative Count of Conforming Charts for High Yield Processes Based on Average Number of Items Inspected, International Journal of Quality and Reliability Management, 30 (9), pp. 942-957. (Scopus)(國科會專題研究計畫 NSC 98-2410-H-390-003)
  • Chen, Jung-Tai, 2009, A New Approach to Setting Control Limits of Cumulative Count of Conforming Charts for High-Yield Processes, Quality and Reliability Engineering International, Vol. 25/8, pp. 973-986. (SCI, EI)
  • Jung-Tai Chen, 2008, Queueing Models of Certain Manufacturing Cells under Product-Mix Sequencing Rules, European Journal of Operational Research, 188, pp. 826-837. (SCI)
  • Liou, Tian-Shy, Ching-Wen Chen*, and Jung-Tai Chen, 2006, Optimal Allocation of Production Resources for a Multi-plant Firm, International Journal of Information and Management Sciences, , 17 (4), pp. 35-50. (EI)
  • Chen, Jung-Tai, 2005, Using the Sum-of-Uniforms Method to Generate Correlated Random Variates with Certain Marginal Distributions, European Journal of Operational Research, Vol. 167/1, pp. 226-242. (SCI, EI)
  • Chen, Jung-Tai, Queueing Models of Certain Manufacturing Cells under Product-Mix Sequencing Rules, submitted to European Journal of Operational Research in June 2005 (under 2nd review). (SCI) (國科會專題研究計畫 NSC 91-2213-E-390-003)
  • Chen, J.T., and A.Thesen, 1998, Performance Estimation of a Manufacturing Cell Using Rotation Scheduling, Computers and Industrial Engineering, Vol. 35/1-2, pp. 77-80. (SCI)


  • Thesen, A., and J.T. Chen, 1996, Jointly Optimized Buffer Allocation and Sequencing Rules for an FMS, Proceedings of IASTED Conference on Modeling, Simulation and Optimization, Gold Coast, Australia, May 6.
  • 陳榮泰、劉天賜、楊泄煌,小批量生產系統之績效估計,中國工業工程學會九十年度年會暨學術研討會,高雄,民國九十年十二月八日,(國科會專題研究計畫 NSC89-2213-E-132-005-)
  • 陳榮泰、劉天賜、李振國,使用拔靴複製法計量值管制圖之研究,中國工業工程學會九十年度年會暨學術研討會,高雄,民國九十年十二月八日,(國科會專題研究計畫 NSC89-2416-H-132-003-)
  • 陳榮泰、劉天賜、陳慶文,使用均等和產生自我相關隨機變數之若干確切關係,中國工業工程學會九十年度年會暨學術研討會,高雄,民國九十年十二月八日。
  • 陳榮泰,2011-2012,無須資料轉換下具型態參數與尺度參數之非對稱品質特性其管制圖之設計,100/08/01∼101/07/31,國科會專題研究計畫,NSC 100-2410-H-390 -023 -。
  • 陳榮泰,2010-2011,循環式排程下製造系統考慮換模時間之最佳加工順序與績效分析,99/08/01∼100/07/31,國科會專題研究計畫,NSC 99-2410-H-390 -026 -。
  • 陳榮泰,2009-2010,累積數量管制圖最佳管制界限之研究,98/08/01∼99/07/31,國科會專題研究計畫,NSC 98-2410-H-390 -003 -。
  • 陳榮泰, 2003, 受產品組合限制之製造系統產出率最佳化之研究(I), 國科會專題研究報告, 計畫編號:NSC 91-2213-E-390-003 
  • 陳榮泰, 2002, 使用拔靴複製法多變量管制圖之研究, 國科會專題研究報告, 計畫編號:NSC90-2416-H-390-001
  • 陳榮泰、劉天賜, 2001, 小批量生產系統之績效估計, 國科會專題研究報告, 計畫編號:NSC-89-2213-E-132-005
  • 陳榮泰、劉天賜, 2001, 使用拔靴複製法計量值管制圖之研究, 國科會專題研究報告, 計畫編號:NSC-89-2416-H-132-003
  • Chen, J.T., 1998, Analytical Performance Models for Certain Flexible Manufacturing Cells, Unpublished Ph.D. Dissertation, Department of Industrial Engineering, University of Wisconsin-Madison.